ALL CARD BUNDLES INCLUDE THE APPROPRIATE CARD-READER.

CFast-2 Extreme Pro Cards for (ARRI Alexa Mini, Amira, C300MK2).
SanDisk 120GB card, $35 per day
SanDisk 128GB card, $45 per day
SanDisk 256GB card, $55 per day
(5 x 128GB included with Alexa Mini, Amira; 3 x 128GB included with C300MK2 hire).


SXS PRO+ Cards for (ARRI Alexa Classic).
Sony SXS PRO 64GB card, $45 per day
Sony SXS PRO 128GB card, $75 per day
(5 x 64GB included with Alexa Classic hire).


P2 EXPRESS Cards for (VARICAM LT).
Panasonic P2 Express 256GB (B Series), $95 per day
(3 x 256GB included with Varicam LT hire).


P2 Cards for (HPX-3000).
Panasonic 16GB P2 card, $35 per day
Panasonic 32GB P2 card, $55 per day
Panasonic 64GB P2 card, $65 per day
(5 x 32GB included with HPX-3000 hire)


SXS Cards.
Sony 8GB SXS card, $20 per day
Sony 16GB SXS card, $35 per day
Sony 32GB SXS card, $50 per day
(included when hiring a SXS camera or monitor combo)


Please add 10% insurance, and 15% Gst


CFast-2 / CF / SXS PRO+ / SXS / P2 EXPRESS / P2 -
CARD-READERS AT (READERS/VTR) LISTINGS ON THIS PAGE

Use the DMF2 for lens zoom control precision.

The DMF2 now features: programmable soft stops and a new speed control knob with a digital readout. The soft stop allows the user to automatically slow the zoom a programmed distance from its end of travel. This is especially useful when doing a fast 'snap zoom' or when the operator must operate the camera and control the zoom at the same time.

Niche Micro-Force kits travel with the 'Oppenheimer Panhandle System
(pictured) - which allows easy mounting of the Micro Force Unit to the tripod panhandle.

- Extension Cable 32ft - available -

Connect the ERD servo zoom demand unit to the tripod pan handle. Gives the ability to pan & tilt the tripod, whislt zooming the lens.
For use with Fujinon 2/3 inch lenses.

Includes: 
Fujinon ERD Servo Zoom Demand Unit
Fujinon MCA-7 mounting clamp

Connect the SRD servo zoom demand unit to the tripod pan handle. Gives the ability to tilt and pan the tripod, whislt zooming the lens.
For use with 1/2 inch Fujinon lenses.

Includes: 
Fujinon SRD Servo Zoom Demand Unit
Fujinon MCA-7 mounting clamp

Teradek Bolt for Wireless Video Transmission Kits
Bolt 500 Kit (1 x Tx, 2 x Rx)
Bolt 300 Kit (1 x Tx, 1 x Rx)

The Teradek Bolt is a latency-free wireless transmission system that sends 4:2:2 1080p60 video, at up to 300/500ft. This eliminates the need of a tethered cable to run between the camera and monitor.

- Uncompressed wireless 1080p60 video.
- Bolt 500 (500ft 'line of sight' transmission) HD-SDI only.
- Bolt 300 (300ft 'line of sight' transmission) HD-SDI and HDMI.
- Auto channel selection.

Includes: 
Bolt 500 (1 x Tx, 2 x Rx)
Bolt 300 (1 x Tx, 1 x Rx)

Hire as a single monitor rig, or twin monitor rig with (2 x 13-inch monitor, side by side C-stand mounting bracket). Designed as a self-contained on-set (director's-station or 'AC focus-station). Travels with a single V-Lock, Wireless Receiver bracket per monitor - these brackets connect directly to the main monitor C-stand bracket mount.

13-inch 1920x1080 10-Bit IPS LCD Display
SDI, HDMI Input/Outputs x 2
Cross Conversion
HDR Preview
1500 nits of Brightness (Daylight Viewable)
2-pin Lemo Auxiliary Power
Focus Assist, Peaking, False Colour, Zebra
Pixel Zoom
Frame Guides
Image Rotate / Flip
Anamorphic De-Squeeze (1.3, 1.5, 1.6 2x)
Waveform, Vectorscope, Histogram
Audio Meter / 3.5mm Jack
C-Stand or Trolley, V-Lock Battery (Power) Bracket, Wireless Receiver Mounts Available

Ultra-Bright 7-inch 1920x1080 Display
Optional (Hand-Held or C-Stand) Directors Cage available, with Teradek Bolt 300/500 Wireless Rig

7-inch 1920x1080 display
16:9 Aspect Ratio
10-bit 4:2:2
SDI and HDMI inputs/outputs
Power via 2-pin Lemo to D-Tap
Page Builder OS
HDR Preview
Audio 1 x 3.5mm Headphone Jack Output
Blue Only
False Colour
Focus Peaking
Image Flip
Pixel to Pixel Zoom
Wave Form
Markers
RGB Parade

(4 available) LCD & OLED,

A 7.9 inch, high-res lightweight HD monitor / Perfect for on-board, or off-camera focus assist.

Dimensions: 7.9" x 5.1" x 0.9"
Resolution: 1280x800 Native Resolution 8-bit
Scopes: Waveform, Vectorscope, RGB Parade, Histogram
Inputs: HD SDI, HDMI, Composite, Hirose Power Connector 12watts (Hirose to D-tap option included)
Output: HD SDI loop-through, HDMI, Mnin Head-Phone jack
Features: False-Colour, Zebra x 2, Frame-Guides, Colour Bars, Blue Only

Includes: Small HD DP7 Monitor
Sunhood
Screen Protector
BNC Cables
D-tap Cable
HDMI Cable
Noga Arm with hot-shoe fitting

NICHE HAS A SELECTION OF VIDEO VILLAGE TROLLEY'S AVAILABLE FOR ON-SET USABILITY AND CONVENIENCE.

Single or Dual monitor mounting (up to 2 x 18"5" monitors)
Adjustable (up/down) mounting for single or dual wireless receivers.
Adjustable (up/down) laptop surface.
Storage draw.
Various mounting points

(4 AVAILABLE)

The LH910 offers the highest resolution (1280x768) in it's 9" class. Combined with beautiful picture quality - and professional interfaces such as HD SDI, HDMI & 3G-SDI, the LH910 is a versitile and practical monitor for both studio and field applications.

Niche can offer a heavy duty bracket for positioning 2 x LH910 monitors side by side. This rig is then placed upon a c-stand or lightstand. Perfect as a directors / dop monitor station for 2 camera shoots.

HD SDI In x 2 (2x SDI loop-through)
HDMI In
Side by Side Display
RGB Waveform (in picture area), Vectorscope
Focus-in-Red, Pixel to Pixel Matching
3D Assist Function
Audio Level Meter, Headphone Jack
Tilt Stand
Power with V-Lock Batteries

Includes: 
LH910 Monitor
Manual
Tilt Stand
BNC Cables, HDMI Cables
V-Lock Batteries

(3 available)

Niche can offer a heavy duty bracket for positing 2 x LH900 monitors side by side. This rig is then placed upon a c-stand or lightstand. Perfect as a directors / dop, monitor station for 2 camera shoots.

High resolution of 1024 x 768-pixels
HD/SD multi-format compatibility
2 x SDI-in & 2 x Component inputs
4 - pin external DC power input
Sony V-Lock, or Anton Bauer Battery mount
Cine-Gamma (FILM-REC) compensation for HPX3000 / VariCam shooting
Approx 16.77 million colours
Built-in waveform (outside of picture area) / Marker options / Blue-only function / Underscan

Includes: Panasonic BT-LH900 8.4 Inch Monitor
Hood
BNC Cables
Giottos Ball Head or Camera Bracket, for C-stand or Cam mounting
Travels in Pelican case

17 inch WXGA LCD panel with 1280 x 768 pixel resolution
Multi-Format options
Freeze-Frame function
Split-screen function (live input & freeze frame)
Multi Frame Marker options
Cine gamma (Film-Rec) compensation for HPX3000 & VariCam shooting
Colour temp selection
Amplified Stereo Speakers
2 x SDI inputs / 2 x component inputs
4 - pin external DC power input

Includes: Panasonic LH1700 Monitor
Hood
BNC Cables
Power Lead
Manuel
Travels in aluminum roadcase

Combine the PIX240 Recorder with the Panasonic 1850 18.5" Monitor, in a compact combo unit for on-set 'record & playback'.

4 AVAILABLE (Required for the RED and Amira video signal)

For PIX240i units in a compact stand-alone configuration; we offer c-stand brackets that can mount a single unit or double PIX unit (pictured). We have a total of 6 x PIX240i units available.

4:4:4 12-bit recording
Apple ProRes or Avid DNxHD codec at multiple data rates
Auto record for ALEXA and RED signals
Record to 256GB internal SSD media
Monitoring via the NEW 18.5inch Panasonic LH1850 monitor
One-person lift
Our Combo's have a break away capable option (remove the PIX240 from the unit) for max portability, and for minimal shooting space (batts available)

(3 AVAILABLE)

A small 5.6 inch, high-res lightweight HD monitor / perfect on-board AC monitor

5.6" Screen size - 1280x800 (16:9)
Focas Assist
Markers
DSLR Scale
Various Scan Modes
Waveform, Vectorscope
Audio Level meter
TC Display
SDI in & out
HDMI in, out via HD-SDI

Includes: TV Logic 056P monitor, Screen Protector
Hood
Noga Arm
D-Tap cables
Sony on-board Battery plate & Batteries, Charger
BNC Cables
HDMI Cables

(2 available) FOR SALE

The LH-80 offers a 7.9 inch wide LCD screen. A focus assist function lets this monitor serve as a viewfinder for HD cameras.

800 x 450 pixel resolution (the LH900 offers more resolution)
Multi-format capability
Focus - in - red function for easy focusing in HD
Approx 16.77 million colours
Built in waveform
SDI input x 1 / Composite input x 1
4 - pin external DC power input
Marker and blue-only functions
Option of V-lock or Anton Bauer batteries (low power consumption)

Includes: Panasonic LH80 LCD Monitor
Hood
BNC Cables
Manual
Giottos ball-head, or clamp - for cam or c-stand mounting
Travels in Pelican case

3 AVAILABLE (Suitable for ARRI ALEXA)
Sony EX30 SXS VTR Deck with the Panasonic LH1700 Monitor

Combining the Panasonic LH1700 Monitor, and Sony SXS VTR deck, this unit is used for on-set monitoring, recording and reviewing. View HD images live - record and review. Having a lightweght compact roadcase, (that one person can easliy lift) makes this a convenient and versatile unit.

Includes: 
12v power option
Remote control
32GB SXS cards x 3
Manual

THE UPDATED & MODERNISED LMB-5 (2 Available)
3 Stage 4x5.65 (includes 138mm round tray)

Includes: 
LMB-25 Shade
Top Flag
134mm clamp
114mm clamp
110mm clamp
95mm clamp
87mm clamp
80mm clamp
Bottom tray catcher
Rotating 138mm pola tray
4x5.65 trays x 4 (vert & horizontal)
Mask set

5 AVAILABLE

2-stage 4x5.65 Matte Box (3-stage including 138mm round rear)

ARRI MMB-1
2 x 4x5.65 trays
1 x 138mm Round Rear bellows (for Pola)

Includes: 
MBB-1 Matte Box for 15-19mm rods
Top Flag
Pair of side flags
2 x 4x5.65 trays, plus rear 138mm bellows for Pola
Various donuts sizes

The ARRI MB-20 (4x5.65) is a robust & modular compact mattebox that can accept wide angle lenses like the Fujinon 13x4.5 - the MB-20 can be attached to the camera via 15mm - 19mm rods or a clip-on adapter. Control flare with 4 x flags. Change lenses with a swing-away bracket.
The Niche MB-20 Mattebox kits also include a 'Chrosziel Quick-release baseplate with 19mm rods, offering more camera stability than a standard baseplate.

Includes: 
ARRI MB-20 MatteBox (2 x rotating stages - 138 rear filter ring)
4x5.65 filter holders x 2
4x4 filter holder x 1
85mm / 95mm / 100mm donuts
85mm / 95mm / 100mm connectors for clip-on mode
Flags x 4
Clip-on adaptor
Swing away bracket
Chrosziel Quick-release baseplate with 19mm rods
The MB20 & Chrosziel baseplate / 19mm rods travel in a aluminum roadcase

4-Stage (19mm studio rod) Matte Box comprising -
3 x tray stages(combo 6.6x6.6/or 4x5.65 with tray inserts)
1 x rear 6" round stage for rotating pola

The MB28 is designed to accommodate lenses with a large front diameter, such as the Canon Cine 21x, or Optimo 24-290.

Includes: 
Arri MB28 Matte Box
Arri Quick-Release Plate / 19mm Rods
Top Flag
Side Flags
Soft Matte Set
Donuts - various
Schneider 6" Round Pola available

hacked by me

Includes: 
Chrosziel 2-stage mattebox 4x5.65
Top flag
Lens donut

3-Axis Motorized Gimbal Stabilizer
Holds DSLR or Mirrorless Cameras
Trigger and Mode Control
3.62 Kilo Payload Capacity

ARRI Grips with either 15mm LW, or 19mm Bridge Support.
Extensions included.

Go hand-held with these O'Connor handle bars

Suitable for heavy payloads
19mm or 15mm use
Position handles to any position via the ball-joints
Easy and fast removal of handles (leave base upon the rods if desired)

Or if you prefer, go hand-held with Vocas (5 sets available)

19mm or 15mm use

IRND 4x5.65:
SCHNEIDER IRND Platinum Set / .3, .6, .9, 1.2, 1.5, 1.8, 2.1 ($185.00 per day)
TIFFEN IRND Set / .3, .6, .9, 1.2, 1.5, 1.8, 2.1 ($185.00 per day)
Smaller sets available.

VARIOUS 4x5.65:
TIFFEN ND Grads - SE, HE Vertical sets, SE Horizontal sets / 4x5.65 - .3, .6, .9
TIFFEN ND Solids set / 4x5.65 - .3, .6, .9
SCHNEIDER Tru Pola / 4x5.65
SCHNEIDER Enhancer / 4x5.65
SCHNEIDER Clear / 4x5.65
TIFFEN Black ProMist / 4x5.65 - 1/8, 1/4 sets
TIFFEN Black Diff FX / 4x5.65 - 1/4, 1/2, 1 sets
SCHNEIDER Hollywood Black Magic - 1/8, 1/4 sets
(3 Filter 4x5.65 sets $105.00 per day)
(Singles: 4x5.65 $35.00 per day)

ROUND POLA:
SCHNEIDER Tru-Pol 138mm round ($35.00 per day)
SCHNEIDER Tru-Pol 6" round for MB28 Mattebox ($50.00 per day)

ROTA POLA:
REVAR CINE 138mm with Schneider Tru-Pol, 5.65x5.65 tray ($50.00 per day)

DIOPTERS:
TIFFEN Diopters - +1/2, +1, +2, +3 / 138mm round ($195.00 per day)
TIFFEN Diopters - +1, +2, +3 / 4.5" round ($160.00 per day)

VARIOUS 4x4:
TIFFEN ND Solids set / 4x4 - .3, .6, .9
TIFFEN White ProMist set / 4x4 - 1/8, 1/4, 1/2, full
TIFFEN Pola 4x4
TIFFEN Clear / 4x4
(4x4 sets $45.00 per day)
(4x4 singles $15.00 per day)

DOUBLE SIDED (INCLUDES 2-SPEED LEFT KNOB) 15-19mm

If you grew up on the FF3, then the FF5 CINE is for you !

Includes: 
Marking discs x 8
Flexible Short Shaft (Rats tail)
Crank Handle
Focus gears - various

(This item is currently for sale).

DOUBLE SIDED, 15-19mm

The FF-5HD makes working with video lenses easier through a longer swing arm, a lower gear ratio and a selection of video gears.
All Niche FF-5 follow-focus units are double sided.
All Niche cameras travel with Chrosziel lightweight supports to allow the use of 15mm rods - the FF-5 can be used in 15 or 19mm configuration.

Includes: ARRI FF-5 Follow Focus unit (double sided)
Adaptor for bridge plate - (allows the use of 19mm rods)
Marking discs x 8
Flexible short shaft (rats tail)
Crank handle
0.6 gear for Fujinon
0.8 gear for primes
Allen key & screwdriver
The FF-5 travels in a Pelican case

DOUBLE SIDED, 15-19mm

Includes: 
Double sided CFF-1 Follow Focus Unit
Bridge for 19-15mm studio rods
Bridge for LWS 15mm rods
2 x Cine Gears (43 & 35 tooth)
1 x Fujinon Gear
1 x Canon Gear
10 x Discs
Zacuto Rats Tail
Crank handle

The new lightweight Arri follow focus designed for lightweight cameras such as the Sony PMW-F3 and Panasonic AF102. Includes focus point 'stop' and reverse direction for Nikon and Zeiss ZF lenses.

Includes: 
Bevelled marking discs x 5
Flexable short shaft (rats tail)
0.6 for Film Primes focus gear
0.8 for Fujinon ENG focus gear

Heden Carat Digital Focus Focus System / L Series Motors,

Go wireless with our Heden Carat follow-focus systems.
We run the L-series (lightweight) motors for hand-held, steadicam, easyrig and movi applications.
15-19mm
Back-up cables

THE ULTIMATE

Max Payload 87LB (39.5 KG)
Tilt Range 90 degrees
Pan Rangle 360 degrees
Weight 22.9LB (10.4 KG)
Illuminated Bubble

Includes: 
O'Connor 2575D Fluid Head (150mm bowl)
Euro Plate
Ronford Tall Legs
Ronford Short Legs
Hi-Hat
Ronford (new style) Spreaders x 2

2 AVAILABLE

The 2065 fluid pan & tilt head features OConnor's stepless counterbalance system as well as ultra-smooth pan & tilt fluid drag designed for cine-style shooting. A collapsible counterbalance crank handle and numerical readout make counterbalancing the payload easy. OConnor's fluid drag system allows an extremely quick pan movement from one position to another, recoving instantly without any spring back. In other words, the Rolls-Royce of fluid head technology

Max Payload 71LB (32.2KG)
Tilt Range 90 degrees
Pan Range 360 degrees
Weight 22.9LB (10.4KG)
Illuminated Bubble

Includes: 
OConnor 2065 Fluid Head (150mm bowl)
Euro Plate
Ronford Heavy Duty Tall Legs
Ronford Heavy Duty Short Legs
Ronford (new style) Spreaders x 2
Hi Hat

(5 sets available)

Includes: 
Sachlter 7+7 Head (or Sachlter Video 30)
Ronford Tall Legs - Heavy Duty (150mm)
Ronford Short Legs - Heavy Duty (150mm)
Ross West ground spreaders x 2
Hi Hat (150mm)
Hex cases available

The Sachlter Video 20 Head has a recommended payload of 20kg's.
Choose between...
Carbon fibre or aluminum Legs - lightweight or heavy duty
Off-ground or on-ground Sachlter spreader.
Travels in a Sachlter tripod tube.

The Video 18 has a recommended payload of 18kg's
Choose between ...
Carbon fibre or aluminum legs, lightweight or heavy duty
Off-ground, or on-ground Sachlter spreader
Travels in a Sachlter tripod tube

The Sachlter Video 15 has a recommended payload of 15kg
Choose between ...
Carbon fibre or aluminum legs
On-ground or off-ground spreader
Travels in a Sachlter tripod tube

The Sachlter DV8 tripod has a recommended payload of 8kg's
Choose between ...
Aluminum or carbon fibre legs
On-ground or off-ground spreader
Travels in a Sachlter tripod tube

The original Australian Cine Saddle (LARGE)

We hire battery kits, usually to international crew, due to flight restrictions on batteries. We will hire batteries & chargers in any configuration - type or amount. We can offer the following ...


BATTERIES -
Swit 8160s 190Wh V-Locks (8 per kit, plus charger)
Global Media Li95s, Li160s, Li160R, Li190s V-Locks (6 per kit, plus charger)

for RED - Global Media Li160Rs, Li190Rs (6 per kit) - 4 battery kits available
for RED, MINI, AMIRA & ALEXA - Swit 8160s (8 per kit) - 4 battery kits available
for ARRI - 24V 18ah block batteries (x 6) with 3 x 24v chargers
- 12V block batteries / chargers also available


CHARGERS / AC -
Swit D3004s 4 Bay,
Sony BCM150 4bay,
Sony BCL120 4bay
Sony BCM50 2bay,
Sony BCM70 2bay
Global Meda SCA4s 4bay


ADAPTORS -
IDX Anton Bauer to V-lock.

Includes: 
TYPICAL BATTERY KIT:
Swit 8160s 190Wh Batteries x 8
Swit 4-bay Charger
4-pin AC power lead
Battery & Charger kits travel in aluminium road-cases

Includes: Matthews Low-Boys, designed as (AC Focus Stations)
Kupo / Matthews, C-Stands
Kupo Runaway Base Stands (wheels)
Arri Light-stands
Sand Bags etc ...

The Kino Flo, Diva 400 light provides a 'soft' fluroscent light - usually used in interview situations to provide a soft flattering light to the subject - combined with the practicality of this light omitting zero heat, the Diva 400 is a true favorite. Features on-board dimmer, 2 lamp - 4 lamp switch, daylight or tungsten lamp option.

Includes: 
Kino DIVA 400 Light
5 x daylight lamps
5 x tungsten lamps
Gel Frame
400 Flozier
Silver Honeycomb
ARRI Stand
Power Lead
Travels in Kino Flo travel case (705x197x476mm) 5.4kg

Open-face 2000w light

Includes: 
Strand 2K light
ARRI lightstand
Power lead
Spare bulb
Travels in canvas carry case

The ARRI 650 PLUS FRESNAL tungsten spotlight, developed by computer aided design, provides the latest lighting technology. The excellent light performance as well as rigid design makes it ideal for indoor and outdoor applications.

Includes: 
ARRI 650 FRESNAL light & Barndoors
ARRI light stand - 3 stage
Gel holders
Spare bulb
Power Lead
Canvas carry case, or aluminum roadcase

The ARRI 300 FRESNAL PLUS tungsten spotlight, developed by computer aided design, provides the latest lighting technology. The excellent light preformance as well as rigid design makes it ideal for indoor and outdoor applications.

Includes: 
ARRI 300 Fresnal Plus Light
ARRI lightstand - 3 stage
Gel Holder
Spare bulb
Power Lead
Travels in canvas carry case, or aluminum roadcase

The Sachlter Reporter 75H is designed for on-board camera application. Offers a maximum 75w when powered from 12v block batteries. Also able to power from the camera via the Anton Bauer power connector. Powering off the camera requires using a max 35w bulb. The 75H has a built-in dimmer dial.

Includes: 
Sachlter 75H Reporter Light
Barndoors
25w, 50w, 75w bulbs
Anton Bauer Power Cable
Diff frame
12v block battery / charger, if required
Travels in a Pelican case

Small unit for handycam applications. 10watt or 20watt option.
Attach to camera via hotshoe mount.

Includes: 
Sony 20DW2 Video Light
Sony batteries x 3

(This item is currently for sale).

With the evolution of the wireless Series 500, Sennheiser offers video professionals, high-quality state-of-the-art RF transmission systems with a high level of operational reliability and ease of use.

Includes: Sennheiser SK500 Transmitter pack
Sennheiser EK500 Receiver pack
9v Batteries (1st two included)
Sennheiser ME4 cardioid clip-on lapel mic
Sony Headphones
Manual
This 500 series radio-mic kit travels in a Pelican case

The ME66 is a shotgun microphone capsule designed for use with the K6 power module. It is especially suitable for reporting, film and broadcast location applications and for picking up quiet signals in noisy or acoustically live enviroments.

Length of ME66 & K6 is 315mm (XLR connector excluded)

Super-cardioid / lobar pick-up pattern
Highly directional
Low inherent self-noise
High sensitivity
Wide frequency response

Includes: Sennheiser ME66 Mirophone & K6 power module
XLR cables short & long
Sony headphones
Rycote mic holder
Sennheiser mic clamp
Foam & Fluffy windsheild
Spare AA battery
Screwdriver
The ME66 mic kit travels in a Pelican case

The ME64 is a cardioid microphone capsule designed for use with the K6 power module. It has a very wide range of applications including reporting, interviews, dubbing, live sound reinforcement and recording applications.
Niche uses the ME64 mic on several cameras as a camera mic.

A good choice for small camera applications as the ME64 & K6 is only 200mm long(excluding XLR connector)

Excellent directivity across whole frequency range
Very good feedback rejection
Effective rejection of incidental rear noise
High speech clarity
High maximum sound pressure level
Wide frequency range
Integrated pop filter

Includes: Sennhesier ME64 Microphone & K6 power module
Windshield Fluffy
XLR cables short & long
Spare AA battery
Sennheiser mic clamp
Sony Headphones
Screwdriver
The ME64 mic travels in a Pelican case

The TRAM TR-50 ia a professional lavalier microphone that answers the needs of the most demanding sound recording engineer. The extended frequency response range and omni-directional characteristics have been designed to satisfy the most stringent requirements in all professional audio fields, particularly film and TV production.

Nominal impedance; 3,000
Maximum SPL; -134dB
Current Drain (Micro A); 20-40
Operating Voltage; 1.5v

Includes: TRAM TR-50 lapel Mic Kit
Wind Sheild
Mic Holders x 4
Spare battery
XLR Cable
Headphones

3-stage boom poles available

Niche BNC cables are made from Japanese manufactured Canare cable. We can supply BNC lengths from 0.3 metre - 50 metres. We will hire BNC cables on their own if required. Our cables are suitable for all HD applications.

All monitors include BNC cable.

Slave your external audio & camera timecode

Includes: 
Ambient ACC501 Master Controller
Ambient ACL203 Lockits x 4
Spare Cables,